Views: 22 Author: Site Editor Publish Time: 2022-09-16 Origin: Site
You can always buy an industrial hand push floor scrubber, but sometimes it needs to be replaced. A good Industrial hand push floor scrubber will keep your floor looking ideal for years to come. That's why it's important to invest in a high-quality hand push floor scrubber.
How to replace the vacuum motor of the hand push floor scrubber?
What are the dimensions of the hand push floor scrubber?
What are the advantages of hand push floor scrubber?
If your hand push floor scrubber isn't working properly, it may be time to replace the motor. Follow the steps below to replace the scrubber vacuum motor:
The first step is to turn off the key switch on the control panel.
Drain the recovery tank by removing the drain hose from the stand and placing it over the floor drain. To start the actual draining process, unscrew the hose plug. Finally, lift up the recycling bin.
Gather the tie-down straps that secure the wiring. Then, cut the straps and disconnect the vacuum motor's electrical connections.
Remove the vacuum motor cover to expose the mounting screws. If the vacuum motor cooling fan cover comes off, make sure to reassemble it before running the motor.
Remove the vacuum motor from the industrial scrubber. Also remove the foam pieces, paying special attention to their placement.
How to replace the vacuum motor of a hand push floor scrubber? The final step is to reassemble the removed parts in reverse order.
The hand push floor scrubber is a pad-assisted or wheel-driven cleaning machine designed to clean facilities quickly and efficiently. In addition to walk-behind scrubbers, there are smaller (upright) and larger (drive-in) scrubbers.
The hand push floor scrubber itself can be divided into four main sizes: Micro, Small, Medium and Large. These dimensions refer to the dimensions of the wash path and are equivalent to the dimensions of the scrub head.
1. Fast charging and high efficiency
The lithium battery can be fully charged in 3 hours. The cleaners work in the morning, charge them at noon, and then use them in the afternoon. The usage rate of the hand push floor scrubber is high, and the work efficiency is correspondingly improved.
2. Long life
The lithium battery can support deep cycle charge and discharge times of 2000+, and can be used for 3-5 years without replacing the battery, and the attenuation of the lithium battery is weak.
3. Lithium battery is light in weight
The energy density of lithium batteries is much higher than that of lead-acid batteries, so the weight of batteries of the same specification and capacity is much lower than that of lead-acid batteries. When applied to the hand push floor scrubber, it will be lighter and more flexible in cleaning.
4. Lithium battery can be used at any time without memory effect.
After reading the above information, are you interested in it? If you also want to order a fully hand push floor scrubber, please contact Orient Industrial Co., Ltd.